The short answer
Modern felt roofing commonly means a specified reinforced bitumen membrane system. Its suitability depends on the roof’s condition, build-up, details and intended use. Ask about preparation, the complete system, application method and aftercare, rather than choosing by a layer count or headline guarantee alone.
What modern roofing felt means
BMI Icopal describes reinforced bitumen membranes, often used in layered systems with a protective cap sheet. Systems and application methods vary; not every felt roof uses the same build-up. [1]
For you, the practical question is which complete system is being proposed and why. Ask for the relevant product details and an explanation of their role. “Premium felt” is less useful than a specification that identifies the roof, preparation and finished details.
This also helps you compare like with like. A price for a basic outbuilding covering should not be used as the benchmark for a designed flat roof above a heated room. The roof’s use and construction need to be understood first.
Where the choice starts: the existing roof
Tell us what the roof covers, whether it is leaking and what has been done before. A garage, an occupied extension and a roof with several rooflights can present different requirements even when their areas are similar.
Ask what is known about the deck and retained layers. If the roof has been patched or coated, explain that history and provide product details if you have them. The new specification should be based on the actual starting condition.
A replacement covering cannot make every unsuitable underlying arrangement disappear. Ask which preparation and repairs are included, and which findings may remain uncertain until the existing roof is opened.
Repair, overlay or renewal?
A defined local defect may be repairable where the surrounding roof is suitable. An overlay and a strip-and-renew job involve different assumptions about what remains in place. The quotation should state which is proposed.
For an overlay, ask how the existing construction has been assessed and whether the proposed system is compatible. For a renewal, ask which layers are removed, whether deck work is included and how any concealed deterioration will be handled.
Use our flat-roof repair planning guide to compare those approaches. A description such as “new felt” should not leave you guessing whether the old roof remains beneath it or what happens around the perimeter.
Application methods and fire precautions
BMI notes that felt-system application methods differ and that fire risk needs consideration, including flame-free approaches where appropriate. A torch is not the automatic answer for every detail. [1]
Ask the contractor to explain the planned method and precautions for your building. You do not need to supervise the technical process, but you should know that adjacent construction and the working area have been considered.
Do not attempt torch application or a repair using an unknown product yourself. If there is active water ingress, contact us about appropriate assistance and distinguish any temporary measure from the permanent specification. The urgency of a leak does not remove the need for a suitable method.
The edges, outlets and rooflights matter
Ask how the specified system will meet each wall, rooflight, outlet and external edge. The open surface may be the largest visible area, but it does not describe the complete weatherproofing job.
If new layers alter the finished level, the surrounding details need to be considered with them. Ask which components will be retained and whether any adjustments are included. A rooflight or outlet that remains outside the scope should be clearly identified.
Discuss drainage concerns and the room below at the same time. If insulation work is proposed, understand the whole build-up and responsibility for its design. Our insulation guide explains the questions to raise before the roofing specification is finalised.
Older roofs and uncertain materials
If asbestos is suspected, do not disturb or sample the material yourself. HSE advises appropriate assessment and controls before work on suspected asbestos-containing materials. [2]
Tell the contractor about any previous survey or known material concern before removal is priced. An ordinary roof quotation should not silently assume that every existing layer can be handled and disposed of in the same way.
You do not need to identify an old roof by sight. If you are uncertain, say so and ask what investigation is appropriate. The aim is to define the work properly before it starts, not to turn the enquiry into a DIY materials test.
Compare the full cost and guarantee
Check access, removal, deck preparation, insulation where applicable, membrane system, details, waste and VAT. A cheaper quotation may retain more of the existing roof or exclude work another contractor has included.
Ask what guarantee applies to the particular installation, who provides it and what conditions it carries. A manufacturer’s product warranty and a contractor’s workmanship promise may cover different things. Do not assume a long period is automatic for every felt system or every repair.
Keep the specification and handover information. If future work is carried out by another trade, knowing the actual system is more useful than remembering that the roof was described as “felt”.
Aftercare and the next step
Follow the maintenance advice for the installed system and arrange appropriate access when needed. From safe positions, note changes such as new indoor staining, visible damage or debris around accessible-to-view drainage points.
Do not assume the roof is intended for routine walking or storage. If you want regular access or a different use, it needs to be part of the design brief. Ask before adding equipment or allowing another trade to work on the surface.
For a felt-roof enquiry, send us the postcode, what the roof covers and whether you need a repair or are planning a renewal. We can discuss the condition and appropriate options before you commit to a material.
Your questions answered
Is modern felt the same as shed felt?
The term can cover different products and applications. Ask for the professional roofing system proposed for your property, including preparation and details. Do not compare unlike specifications simply because both use the word felt.
Does a felt roof always need three layers?
No universal layer count describes every system. The appropriate build-up depends on the specified products and application. Ask what complete system is proposed rather than using a number of layers as the only quality test.
Can a felt roof be patched?
A local repair may be appropriate where the defect and surrounding condition support it. Ask whether the work is a lasting repair or temporary protection and what remains outside the treated area.
Is felt always installed with a torch?
No. Application methods vary. Ask what method is proposed and why it suits the building and details. Fire precautions should be considered as part of the planned work.
Can I walk on the finished roof?
Only in accordance with the roof’s intended use and appropriate access arrangements. Do not assume a flat surface is designed for casual walking, storage or a terrace. Discuss regular access before the system is specified.
How do I compare felt with EPDM or GRP?
Compare suitable complete systems, including preparation, support, insulation, drainage, junctions, guarantees and aftercare. Our flat-roof materials guide explains the distinctions without claiming one material is best for every property.
Sources and further reading
Numbered references support the relevant points above. The guidance here is general; the right specification depends on your property.
- BMI Icopal, How to felt a flat roof.
- Health and Safety Executive, Asbestos — frequently asked questions.
